VTY Login Sim v1
Local user, VTY login local, Telnet and SSH, exec-timeout on VTY lines, save config.
Open simulation
CCNP Practice Launcher
Open this page once in Cursor Simple Browser, then navigate from here. Be Certified Today · becertifiedtoday.com
Practice questions
Loading studies…
Drag and drop
Loading drag-and-drop set…
Test simulation
Builds one timed test with random content: 40 practice questions, 5 standard drag-and-drop, 4 JSON drag-and-drop, and 3 simulations. Timer starts at 120:00 when the test begins. Use the runner’s Next button to move through items.
Start test simulationSimulations (CLI)
Version 1
Rapid PVST+ and LACP
SW20-only fixes: Rapid PVST+, trunk to SW30, Port-channel trunk alignment for LACP.
Open simulationVRF + Tunnel0
Extend CORP VRF on R10/R20 over Tunnel0, IPsec profile, and VRF static routes for VLAN 100 ↔ 101.
Open simulationOSPF DR/BDR
R3 DR vs R20 BDR on shared segment; clear OSPF on R20; R10 priority 0 (DROTHER); save R3 and R10.
Open simulationOSPF DR & summarization
R2 DR in area 10; clear OSPF on R2 and R10; area 10 range on process 10; verify 10.1.0.0/16 on R3; save R2.
Open simulationOSPF advertised & summarized
R1: OSPF 1 on interfaces only; R2/R3 ABR area range /16; verify OSPF on R1; save all three.
Open simulationOSPF summarization (R30)
ABR on R30: OSPF 100, Lo0 router-id, networks; area 50 range /18 or /17 into area 0; save.
Open simulationTrunk, UDLD & LACP
SW10 only: fix SW30 trunk, UDLD aggressive, rebuild Po10 with LACP; PC2 pings; portfast + long pathcost; save.
Open simulationLACP & root bridge
SW10 only: no Po11, LACP trunk range e0/0–2, channel-group 11 active; STP root primary VLAN 10 & 30; save.
Open simulationNetFlow, SPAN & IP SLA
R1: Flexible NetFlow exporter to PC2, schedule IP SLA 5; Sw1: SPAN session 11; save both.
Open simulationAccess-list & CoPP
R10: extended ACL 150 — permit EIGRP before deny; R20: CoPP (ICMP / Telnet / SSH variant), police rate, control-plane; save both.
Open simulationVersion 2
VTY Login Sim v2
Telnet and rlogin on VTY, AUX exec-timeout, R1 or R2 prompts, save config.
Open simulationVRF Configuration Sim 2
R22 only: vrf definition Finance, Tunnel10 to R11, e0/1 in VRF, statics for VLAN 111/222; save.
Open simulationOSPF DR/BDR 2
Area 20 point-to-point; R10 DR in area 10; clears on R3/R20 and R2/R10; verify neighbors; save R3, R10, R20.
Open simulationOSPF summarization 2 (R20)
R20 only: OSPF 20, Lo0 router-id, ip ospf on interfaces (no network cmds); area 40 /18 range; save.
Open simulationeBGP Neighbor 2
R1 only (AS 100): address-family IPv4, neighbors to AS 200/300, advertise three loopbacks with exact masks; save.
Open simulationNetFlow, SPAN & IP SLA 2
R1: flow monitor on e0/0; Sw1: SPAN VLAN 12 to e1/3; IP SLA 1 ICMP or HTTP; verify monitor; save.
Open simulationTip: keep this in one Cursor browser tab for a contained workflow.